SELECT t1.c1,c15,c25,c56,c57,c59,c85,c89,c90, id_pro,t1.c2,c37 FROM g_4_data AS t1 inner JOIN g_4_data_b AS t2 on t1.c2=t2.c2 WHERE t1.c3<>'-' and t1.c6 = 'yes' AND t1.c9 = 'tweezers' AND t1.c10 = 'SMD Tweezers' order by t1.c36 LIMIT 0, 30
SMD Tweezers - tweezers in LIFE SCIENCE & MICROSCOPY | Ideal Tek
Log in to your account
Insert mail
Insert password
Inseritmail
Back to login
Select Filters Apply selections
Clear All
SMD Tweezers
The variety of tips and angles available on SMD Tweezers allow for smooth handling and positioning of all Surface Mount Device components. Satin antiglare finish and ergonomic design. Available as reverse action model.
Ideal for electronics assembly, labs, clean rooms and circuit board repair and rework.
17 products found
Article code
Tip style
Short description
ESD safe
Body material
Product OAL (mm)
Tip thickness (mm)
Tip width (mm)
Kit of 5 tweezers: SM103, SM107, SM108, SM111, SM115.
no
SA
0.00
0.00
0.00
Tweezers. Tips: handling, positioning, bent, flat. OAL: 115mm
no
SA
115.00
0.30
1.75
Tweezers. Tips: triple bent, crab's claw shape. OAL: 115mm
no
SA
115.00
0.15
0.20
Tweezers. Tips: handling, positioning at 45 angle. OAL: 115mm
no
SA
115.00
0.30
1.60
Tweezers. Tips: handling, positioning sot packages, monolithic chip capacitors, straight. OAL: 120mm
no
SA
120.00
0.35
1.70
Tweezers. Tips: handling, positioning sot packages vertically, hammer shaped, straight. OAL: 120mm
no
SA
120.00
0.30
1.55
Tweezers. Tips: handling, positioning sot packages horizontally (4 mm flat base long), fine shaped, striaght. OAL: 120mm
no
SA
120.00
0.25
3.80
Tweezers. Tips: positioning flat devices, double bent. OAL: 120mm
no
SA
120.00
0.15
1.40
Tweezers. Tips: positioning, soldering 1mm wide components, straight. OAL: 120mm
no
SA
120.00
0.30
1.50
Tweezers. Tips: positioning, soldering 1mm wide components, 45, no anti-crush feature, straight. OAL: 120mm
no
SA
120.00
0.25
2.00
Tweezers. Tips: positioning monolithic chips capacitors, grooved, straight. OAL: 120mm
no
SA
0.00
0.45
2.00
Tweezers - Teflon coated. Tips: positioning monolithic chips capacitors, grooved. OAL: 120mm
no
SA
0.00
0.00
0.00
Tweezers. Tips: positioning 5mm monolithic chip capacitors, grooved. OAL: 115mm
no
SA
115.00
0.50
1.50
Tweezers. Tips: positioning 5mm monolithic chip capacitors at 60, grooved. OAL: 120mm
no
SA
120.00
0.35
2.15
Tweezers. Tips: holding, positioning 1mm cylindrical devices, grooved at 30 angle. OAL: 115mm
no
SA
115.00
0.60
0.85
Tweezers. Tips: grooved, straight, vertical positioning of cylindrical devices. OAL: 115mm
no
SA
115.00
0.50
0.75
Tweezers. Tips: positioning sot packages at 30 angle, flat, squared. OAL: 120mm
no
SA
120.00
0.40
1.50
6828 Balerna
Switzerland
Tel. +41 91 683 32 29
Fax +41 91 683 03 71