SEARCH BY
246CFR.SA.1
Tweezers | Plastic Replaceable Tip TweezersPlastic replaceable tip tweezers - Carbon fiber - tips: thin, angled head (#A246CF). OAL: 125mm - 4.92". ESD safe
Type 246CF Plastic replaceable tip tweezers are suitable to applications which require holding a small component firmly. The bent geometry provides maximum visibility and increased ergonomics. The Carbon Fiber reinforced ESD Plastic provides the tweezers with ESD and non-scratching properties.
Documents
246CFR.SA.1 Datasheet
Tip material TDS
Body material TDS
Related products
Part Number
Family
Category
Full description
Tweezers
Plastic Tweezer Tips
Kit of 2 Carbon fiber tips and 3 screws - tips: curved, very fine (for #7CFR.SA Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 PVDF tips and 3 screws - tips: wafer, handling 4", top fingers, stepped bottom paddle (for #4WFSVR.SA Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 Carbon fiber tips and 3 screws - tips: straight, ultra fine, very sharp (for #5UFCFR.SA Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 PVDF tips and 3 screws - tips: straight, very fine, round, flat (for #2ASVR.SA-#2AXSVR.SA Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 PVDF tips and 3 screws - tips: thin, angled head (for #246SVR.SA Tweezers). OAL: 36mm - 1.42". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 Carbon PEEK tips and 3 screws - tips: straight, very fine, sharp (for #5CPR.SA-#5XCPR.SA Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 Carbon PEEK tips and 3 screws - tips: wafer, handling 4", top fingers, stepped bottom paddle (for #[email protected] Tweezers). OAL: 40mm - 1.57". ESD safe
Tweezers
Plastic Tweezer Tips
Kit of 2 Delrin tips and 3 screws - tips: straight, thick, beveled, strong (for #249DGR.SA Tweezers). OAL: 40mm - 1.57"